We are BACK on track with the G5 Case Mod!
On day nine the main full window panel was finally added, it was made from 1/8 thick Orange transparent Acrylic / Plexiglass and it has 2 aluminum brackets that hold it in place… take a look! Continue reading
Today we manage to work on the PSU cover and sand the outer skin of the chassis… you can see on the video what was done… Continue reading
Today we manage to drill some decoration holes on the top handles, cut the PSU cover, made the PSU tray and attached the I/O Rear Panel. Continue reading
We didn’t do much today due to the heat wave hitting NYC… the HAF X MoBo tray was cut to fit the Power Mac G5… was also check how much clearance we have between the MoBo and the Radiator… place and invert the original PSU cover plate… that’s it… More to come… so stay tuned! Continue reading
Today we cut the side panel window, the bottom floor to fit an ATX PSU and top panel to fit and 120 x 2 radiator for the water cooling system. It was a little bit hard to cut with the rotary tool one of them overheated while we were cutting the panel due to the fact that the panel is like 4mm thick but after that the panel was not match for the jigsaw… Continue reading
Today we will MOD an Apple Power Mac G5 Case. First we disassemble the whole case / chassis. It took us like 1hr and 25 mins to remove all the screws and nuts but it was worth it… Now we have a pretty good look to what we dealing with. So take a look at the gallery and let us know what you think. Continue reading